Enquire Now

TPS2500S Thermal Constants Analyser - Hot Disk Ltd.

MANUFACTURER Hot Disk Instruments
MODEL Hotdisk TPS2500S Thermal Constants Analyser
CONTACT 1 Emma Bell
CONTACT 2 Stewart Latimer
Enquire about this item
SITE City Campus


Key Features

  • Sensors: The TPS 2500 S operates a wide variety of Hot Disk sensors. With sensor radius from 0.5 mm up to 30 mm the instrument is suitable for all kinds of materials and applications.
  • Temperature Control: Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or a temperature-controlled Circulating Bath. These external devices can be directly controlled through the Hot Disk Thermal Analyser software to ensure ease of use.
  • Everything to get you started: The basic TPS 2500 S system includes everything to get you started making measurements, including installation and on-site training. The instrumentation includes: Hot Disk TPS 2500 S instrument; Isotropic, One-dimensional and Structural Probe software modules; a Sensor; Stainless Steel Verification Samples and Room-Temperature Sample Holder.


  • Thermal Conductivity: 0.005 to 1800 W/m/K
  • Thermal Diffusivity: 0.1 to 1200 mm²/s
  • Specific Heat Capacity: Up to 5 MJ/m³K.
  • Measurement Time: 1 to 1280 seconds.
  • Reproducibility: Typically better than 1 %.
  • Accuracy: Better than 5 %.
  • Temperature Range: -253 °C to 1000 °C.
  • With Circulator: -35 °C to 200 °C.
  • Smallest Sample Dimensions
  • 0.1 mm × 10 mm diameter or square for slab testing.
  • 10 mm × 5 mm diameter or square for one-dimensional testing.
  • All Mica sensors.
  • All Teflon sensors.

Item ID #1479.

Last Updated: 21st August, 2017